|
<< Click to Display Table of Contents >> Build 3.0.053 |
  
|
|
<< Click to Display Table of Contents >> Build 3.0.053 |
|
Release date: 4th December 2015
Fixes and improvements:
Installation:
| • | Added a message to say which build of SpecView the user can go back to if they are trying to install a later build after expiry |
Dongle:
| • | It is now possible to install SpecView and run in Demo mode even if the 'free updates until' date has passed |
General:
| • | While in Edit mode Online, going offline when data entry boxes were open could cause 'Failed to come out of runtime' error |
GDW:
| • | There was an occasional crash when going offline after using buttons with the action 'GDW: Close this and Swap to' |
| • | Could not delete Position Dynamics waypoints which were assigned to buttons |
| • | Recipe screens could close sometimes after a Recipe had been downloaded |
Variables List:
| • | Using 'Replace' from the 'Options' menu to change an IP address in an instrument could hang |
| • | Variables List Import when errors occurred during the import the file was not closed, which caused a problem when making another attempt to export or import |
Logging:
| • | Log File Convert could sometimes crash under certain circumstances |
Trend Charts:
| • | Trend Charts clear on batch change was confused by the batch tag being set to '[ ]' which made it erroneously clear the chart |
Archive:
| • | Creating an Archive could cause SpecView's journalling of actions to stop, and not restart until the next day |
| • | Making a SpecView Archive would cause a spurious dump file to be generated. |
Networking:
| • | The Remote now displays a warning message if the Local is running a newer build of SpecView |
| • | The Remote could be incorrectly denied access saying that there were not enough Remote licenses on the dongle |
| • | Batch tags were not being checked on Remotes, so Trend Charts on a Remote couldn't act on them |
| • | Remotes reconnecting to a previously offline Local could be mis-labelled as '--' in the Remote Users Attached list |
| • | Remotes reconnecting to a previously offline Local could sometimes fail to connect |
| • | Remotes could occasionally hang during reconnect |
ActiveX:
| • | ActiveX controls could have transparent fields and buttons when screens were opened or swapped to |
| • | Trying to go into Edit mode offline from start-up by holding the control key while clicking 'Start' does not work with configurations containing ActiveX controls |
Modbus:
| • | New modbus driver 4.1.12.x fixes a number of lockups (causing flat lines on Trend Charts) and crashes |
| • | Write Sequence for booleans was not working as the write fails with the error: 18210 |
| • | Occasional Modbus lockup while writing values to devices that were not present |
| • | Implement Boolean from Enum decoding in Modbus |
Watlow:
| • | Implement Boolean from Enum decoding for StdBus |