The Ethernet/Serial Boxed Converter enables serial devices, such as PROMUX modules, communicating on RS232/485 to be connected to a 10/100 Base-TX Ethernet network.
The Ethernet/Serial Converter can be configured to operate in a number of different modes depending on the application. It can be configured as a transparent data link or it can perform the gateway function of converting Modbus TCP messages to Modbus RTU messages.
Mode 0: Server with slave device connected to the serial port, multi socket.
Mode 1: Server with slave device connected to the serial port or to be used with a Client Converter for point-to-point, single socket.
Mode 2: Client to be used with a Server Converter for point-to-point, single socket.
The Ethernet/Serial Converter includes a web server which enables access to internal parameters for configuration. This allows configuration of IP address, serial data format and operating modes. The web server can be accessed by most web browsers.
SCADA software for people with other jobs!
(C) 2023 SpecView Inc & SpecView Ltd. Page Updated: 01 September 2023