PT16DI - 16 Digital Input Module

The PT16DI module is a 16 channel digital input module. The inputs are isolated from the logic by bi-directional opto-couplers. The inputs are divided into 2 isolated groups of 8 inputs each. This allows for many configurations in which the input module may be used. One such configuration could be where one group is connected as common positive and the second group connected as common negative.

The counters operate in three modes.

In mode 0: All the counters are disabled.

In mode 1: The counters are 32 bit counters allowing a count value from 0 to 4294967295. The count value can be cleared by writing a zero to the associated registers or preset to any other value using the same method.

In mode 2: The inputs are connected as up/down counters. Input 1 will increment counter 1 whilst input 2 decrements counter1. In the same way, inputs 3&4 operate counter 2, inputs 5&6 operate counter 3 and inputs 7&8 operate counter 4,etc.

Note: The count values are not battery backed-up and will be lost if power is turned off.

Order Code PT16DI - 16 Digital Input Module

Click here to see the Procon User Manual.

Digital Inputs	16
Digital Counters	16
Counter Resolution	32 Bit
Counter frequency	1 KHz (max)
Pulse width	500uSec (min)
Counter Mode	UP or UP/DOWN
Digital input 0 level	0 to +6.5Vdc
Digital input 1 level	+12Vdc to +24Vdc
Input Impedance	2200 ohms
Input filter	6553 msec. (max)
Isolation (Field & Logic)	1500 V RMS
Status Indication	LED per channel

SCADA software for people with other jobs!

Home Instruments SpecView Contact What To Buy Partners