|
<< Click to Display Table of Contents >> Build 3.1.257 |
  
|
|
<< Click to Display Table of Contents >> Build 3.1.257 |
|
| • | X-axis scroll bars can now scroll further to the left and right to better accommodate smaller monitors. |
| • | Previously, %%SpecViewInstalledPath%% would fail to point to SpecView's installed file path when used in Write Line to File/Printer. |
| • | Target Text String parameter name is now retentive when editing Write Text to another Text String multiple times. |
| • | New Feature: The Description button in Recipe Manager will now display an asterisk on the button if a description for the recipe is present. |
| • | Previously, if Strategy Controller downloaded a Recipe on start up, then SpecView occasionally would have generated an 'Improper Argument' error. |
| • | Trend charts operating on Remotes can now store Batch JPGs locally to prevent the overwriting of Batch JPGs on network drives. Read more here. |
| • | Trend chart cursors can now be moved when the Trend chart is refreshing the plot area. |
| • | SpecView will now display an error message when exporting a Log Report to a location that is not accessible on the network. |
The following instruments are now supported.
To incorporate another instrument into SpecView, please contact your SpecView representative.
Ascon Modbus
| • | H3 Line Humid & Temp Transmitter |
Automation Direct - BRX/Do More
| • | MHR String Char 64 |
Omega
| • | iServer 2 |
Precision Digital
| • | SuperNova PD500 |
Sixth Sense
| • | PG10/PG20/PG30 |
Watlow Modbus
| • | EZ-ZONE RMC Digital I/O |
| • | EZ-ZONE Timers |
Automation Direct - BRX/Do More
| • | Previously, MC blocks were incorrectly configured and displayed duplicated values. |
| • | Updated instrument help. |
Eurotherm Modbus - 3500 Programmer 1
| • | Parameters were updated to reflect the current firmware. |
Honeywell Modbus - UDC2800
| • | Previously, parameters were incorrectly configured. |
| • | Updated Instrument View. |
Honeywell HC900 - HC9 SPP Segs
| • | Previously, parameters were incorrectly configured. |
| • | Auto-detection will now complete without producing an error. |
Procon: Modmux & Promux Modules - PT8DIO
| • | Previously, parameters were incorrectly configured. |
Ramp Soak 50 Segment Program
| • | The Ramp Soak Program can now be programmed to start at a specific time of day. |
TempCo - TEC 4500
| • | Parameters were updated to reflect the current firmware. |
Vaisala - HMP Series
| • | Previously, parameters were incorrectly configured. |